40 AMP SMART™FULLY AUTOMATIC BATTERY CHARGERINSTRUCTION MANUALThank you for choosing Black & Decker!Go to www.BlackandDecker.com/NewOwnerto regist
9Remove or disconnect the vehicle’s battery when reconditioning.1. Make sure the charger is in initiation state with a circulating pattern on the disp
10F01 — Internal Shorted Cell BatteryIf the battery being charged has an internal shorted cell, the F01 will show. We recommend taking your batteryto
11AccessoriesRecommended accessories for use with your tool are available from your local dealer or authorized servicecenter. If you need assistance r
1GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONSREAD ALL INSTRUCTIONSWARNING: Read all instructions before operating
2SAFETY GUIDELINES / DEFINITIONSDANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.WARN
3and/or severe burns. Be aware of first aid procedures in case of accidental contact with battery acid.• Have plenty of fresh water and soap nearby in
4Follow these steps when the battery is installed in a vehicle. A spark near the battery may cause an explosion. CAUTION: TO REDUCE RISK OF A SPARK NE
5to allow for the maximum proper internal chemical energy transfer. At the end of Stage 2, the charger willautomatically move into Stage 3 charge mod
64/10/20/40A AMP (Charge Rate Selector) (Step 2)allows the user to select the charge rate based onbattery size. This selection and the actual battery
7Charge Rate SelectionAfter charger clamps are correctly connected, plug the charger into a 120 volt AC outlet and the charger willshow “000” on the D
8WARNING: BURST HAZARD:• NEVER EQUALIZE A GEL OR AGM BATTERY, these may burst and cause SERIOUS INJURY and propertydamage.• Remove or disconnect the v
Comments to this Manuals