Black & Decker MULTI-GAS DETECTORS User Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 71
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
BW Defender2
Alarms
23
Sensor Alarm
The detector tests for a missing or defective sensor during the
activation self-test. See the section, "If the Detector Does Not
Work."
Low Battery Alarm
The detector tests the battery on activation and continuously
thereafter. If the battery voltage is low, the detector activates
the Low Battery Alarm.
The Low Battery Alarm continues until you replace the battery
or the battery power is almost depleted. If the battery voltage
drops too low, the detector executes an Automatic Shutdown.
Automatic Shutdown Alarm
If the battery voltage is in immediate danger of dropping
below the minimum operating voltage, the audible alarm
beeps 8 times and the visual alarm flashes 8 times. After 3
seconds, the display blanks out and the detector stops normal
operation. The display shows I LOW periodically until the
battery power is depleted.
Replace the battery. (See the section, "Replacing the
Battery.")
Note
If the Confidence Beep is on, the audible alarm does
not beep during a Low Battery alarm. (See the
section, "Confidence Beep.")
Typically, the Low Battery Alarm continues for 30
minutes before Automatic Shutdown.
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 70 71

Comments to this Manuals

No comments