Black & Decker CDC14GK2-XE Service Manual download pdf (Page 10)

10

ENGLISH

(Original instructions)

u Rotate the tool anti-clockwise and the

screwdriver will activate in the reverse

direction.

Note: The speed of the tool is determined by

the amount of rotation. .

Small rotation = slower speed.

Large rotation = Higher speed.

LED work light

The LED work light (4) is activated automati-

cally when the motion control activator (1) is

depressed.

Automatic shut off

To maintain battery life in case off accidental

activation, the tool will automatically turn off

after 45 seconds of continuous opperation.

The LED work light (4) will blink rapidly for 5

seconds before the tool shuts down.

Hints for optimum use

Screwdriving

u Always use the correct type and size of

screwdriver bit.

u If screws are difcult to tighten, try apply-

ing a small amount of washing liquid or

soap as a lubricant.

u Always hold the tool and screwdriver bit in

a straight line with the screw.

Maintenance

Your Black & Decker tool has been designed

to operate over a long period of time with

a minimum of maintenance. Continuous

satisfactory operation depends upon proper

tool care and regular cleaning.

Your charger does not require any mainte-

nance apart from regular cleaning.

Warning! Before performing any maintenance

on the tool, remove the battery from the tool.

Unplug the charger before cleaning it.

u Regularly clean the ventilation slots in

your tool and charger using a soft brush or

dry cloth.

u Regularly clean the motor housing using

a damp cloth. Do not use any abrasive or

solvent-based cleaner.

u Regularly open the chuck and tap it to

remove any dust from the interior.

Protecting the environment

Z

Separate collection. This product

must not be disposed of with

normal household waste.

Should you nd one day that your Black &

Decker product needs replacement, or if it

is of no further use to you, do not dispose of

it with household waste. Make this product

available for separate collection.

1 2 ... 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments