Black-decker GH750 User Manual download pdf

• USE THE RIGHT TOOL – Do not use this tool for any job except that for which it is intended.

• DONʼT OVERREACH – Keep proper footing and balance at all times.

• DONʼT ABUSE CORD – Donʼt yank cord from power supply. Keep cord from heat, oil,

and sharp edges.

• DAMAGE TO UNIT – If you strike or become entangled with a foreign object, stop tool

immediately, unplug, check for damage and have any damage repaired before further

operation is attempted. Do not operate with a broken hub or spool.

• DAMAGE TO CORD – Keep power cord away from rotating line. If you damage the cord,

unplug it from the power supply before moving the tool or examining the damage. A

damaged cord must be replaced before further use.

• DISCONNECT TOOL – when not in use, when replacing line, or prior to cleaning.

• AVOID DANGEROUS ENVIRONMENTAL CONDITIONS – Do not use electric tools in

damp or wet locations. Follow all instructions in this Instruction Manual for proper

operation of your tool. Donʼt use the tool in the rain.

• DO NOT OPERATE portable electric tools in gaseous or explosive atmospheres. Motors

in these tools normally spark, and the sparks might ignite fumes.

• STORE IDLE TOOLS INDOORS – When not in use, tools should be stored indoors in a

dry, locked-up place out of reach of children.

• GROUND FAULT CIRCUIT INTERRUPTER (GFCI) protection should be provided on the

circuits or outlets to be used for the gardening appliance. Receptacles are available

having built in GFCI protection and may be used for this measure of protection.

• SECURE EXTENSION CORD using the cord retainer shown in Figure 7.

• STAY ALERT – Watch what you are doing. Use common sense. Do not operate tool

when you are tired.

• MAINTAIN APPLIANCES WITH CARE – Follow instructions in maintenance section.

Inspect extension cords periodically and replace if damaged. Keep handles dry, clean and

free from oil and grease.

• CHECK DAMAGED PARTS – Before further use of the appliance, a guard or other part

that is damaged should be carefully checked to determine that it will operate properly and

perform its intended function. Check for alignment of moving parts, binding of moving

parts, breakage of parts, mounting, and any other condition that may affect its operation.

A guard or other part that is damaged should be properly repaired or replaced by an

authorized service center unless otherwise indicated elsewhere in this manual.

WARNING: When servicing double insulated tools, USE ONLY IDENTICAL

REPLACEMENT PARTS. Replace or repair damaged cords.

WARNING: To prevent electrical shock hazard, use only with an extension cord

suitable for outdoor use. Always connect extension cords to a fused line or one protected

by a circuit breaker.

ADDITIONAL WARNINGS FOR STRING TRIMMERS

1. DO NOT immerse tool in water or squirt it with a hose. DO NOT allow any liquid to get

inside it.

2. DO NOT store the tool on or adjacent to fertilizers or chemicals.

3. DO NOT clean with a pressure washer.

SAFETY WARNINGS AND INSTRUCTIONS: POLARIZED PLUGS

To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider

than the other) and will require the use of a polarized extension cord. The appliance plug

will fit into a polarized extension cord only one way. If the plug does not fit fully into the

extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized

extension cord. A polarized extension cord will require the use of a polarized wall outlet.

This plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into

the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to

install the proper wall outlet. Do not change the equipment plug, extension cord receptacle,

or extension cord plug in any way.

SAFETY WARNINGS AND INSTRUCTIONS: EXTENSION CORDS

Make sure your extension cord is in good condition. When using an extension cord, be sure

to use one heavy enough to carry the current your product will draw. An undersized cord will

cause a drop in line voltage resulting in loss of power and overheating. The table shows the

correct size to use depending on cord length and nameplate ampere rating. If in doubt, use

the next heavier gauge. The smaller the gauge number, the heavier the cord. If the exten-

sion will be used outside, the cord must be suitable for outdoor work. The letters “WA” on

the cord jacket indicate that the cord is suitable for outdoor use.

SAVE THESE INSTRUCTIONS

Cat No. GH700, GH750 Form No. 90563741 April 2010

WARNING: IMPORTANT SAFETY WARNINGS AND INSTRUCTIONS

TO REDUCE RISK OF INJURY:

• Before any use, be sure everyone using this tool reads and understands all safety

instructions and other information contained in this manual.

• Save these instructions and review frequently prior to use and in instructing others.

WARNING: When using electric gardening appliances, basic safety precautions should

always be followed to reduce risk of fire, electric shock, and personal injury, including the

following:

WARNING: Some dust created by this product contains chemicals known to the State

of California to cause cancer, birth defects or other reproductive harm. Some examples

of these chemicals are: • compounds in fertilizers

• compounds in insecticides, herbicides and pesticides

• arsenic and chromium from chemically treated lumber

To reduce your exposure to these chemicals, wear approved safety equipment such as

dust masks that are specially designed to filter out microscopic particles.

WARNING: This product contains chemicals, including lead, known to the State of

California to cause cancer, and birth defects or other reproductive harm. Wash hands

after handling.

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING.

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual.

The information it contains relates to protecting YOUR SAFETY and PREVENTING

PROBLEMS. The symbols below are used to help you recognize this information.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may result

in minor or mod er ate injury.

CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation

which, if not avoided, may result in property damage.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL TOOLS

• ALWAYS WEAR EYE PROTECTION – Wear safety spectacles or goggles at all times

when this tool is plugged in.

• GUARD – Do not use this tool without guard attached.

• DRESS PROPERLY – Do not wear loose clothing or jewelry. They can be caught in

moving parts. Rubber gloves and substantial rubber soled footwear are recommended

when working outdoors. Donʼt operate the tool when barefoot or wearing open sandals.

Wear long pants to protect your legs. Wear protective hair covering to contain long hair.

• NYLON LINE – Keep face, hands and feet clear of rotating nylon line at all times.

• THE ROTATING LINE PERFORMS A CUTTING FUNCTION – Use care when trimming

around screens and desirable plantings.

• KEEP ALL BYSTANDERS AWAY – at a safe distance from work area, especially children.

• IMPORTANT WARNING – When being used as an Edger, stones, pieces of metal and

other objects can be thrown out at high speed by the line. The tool and guard are designed

to reduce the danger. However, the following special precautions should be taken:

• MAKE SURE that other persons and pets are at least 100 feet (30m) away.

• TO REDUCE THE RISK of rebound (ricochet) injury, work going away from any nearby

solid object such as wall, steps, large stone, tree, etc. Use great care when working close

to solid objects and where necessary, do edging or trimming by hand.

• AVOID ACCIDENTALLY STARTING – Donʼt carry plugged-in tool with finger on trigger.

• DO NOT FORCE THE TOOL – at a rate faster than the rate at which it is able to cut

effectively.

KEY INFORMATION YOU SHOULD KNOW:

• The guard must be installed before trimming or edging - if not, the motor will

overheat.

• When replacing the line, use only .065 inch diameter ROUND line - otherwise the

unit will not function properly.

• Do not bump the feed head against the ground - it will disrupt the feed

mechanism.

• Angle tool slightly (5

° to 10°) when trimming.

• Always use the cord retention feature.

• For trouble free feeding and best results, only use Black & Decker

replacement spools with dual 0.065 inch line. Black & Decker

replacement spool model number DF-065.

Slot

Encoche

Ranura

Tab

Languette

Lengüeta

Minimum Gauge for Cord Sets

Volts Total Length of Cord in Feet

120V 0-25 26-50 51-100 101-150

(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)

240V 0-50 51-100 101-200 201-300

(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)

Ampere Rating

More Not more American Wire Gage

Than Than

0-6 18 16 16 14

6 - 10 18 16 14 12

10 - 12 16 16 14 12

12 - 16 14 12 Not Recommended

Tab

Languette

Lengüeta

Tab

Languette

Lengüeta

Rib

Rainure

Canal

TRIMMER/EDGER INSTRUCTION MANUAL

Catalog Numbers GH700, GH750

SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.

Thank you for choosing Black & Decker!

Go to www.BlackandDecker.com/NewOwner

to register your new product.

PLEASE READ BEFORE RETURNING THIS

PRODUCT FOR ANY REASON:

If you have a question or experience a problem with your Black & Decker purchase, go to

HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS

If you can’t find the answer or do not have access to the internet,

call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak with an agent.

Please have the catalog number available when you call.

for instant answers 24 hours a day.

1 2 3 4 5 6 7

Summary of Contents

Page 1 - PRODUCT FOR ANY REASON:

• USE THE RIGHT TOOL – Do not use this tool for any job except that for which it is intended.• DONʼT OVERREACH – Keep proper footing and balance at al

Page 2 - OPERATING INSTRUCTIONS

ASSEMBLY / ADJUSTMENT SET-UPASSEMBLY TOOLS REQUIRED (NOT SUPPLIED):- Phillips ScrewdriverATTACHING THE TWO PIECE GUARDWARNING: UNPLUG THE TOOL BEFORE

Page 3 - TAILLE-BORDURE/COUPE BORDURE

AVERTISSEMENT : AVERTISSEMENTS DE SÉCURITÉ ET DIRECTIVES DE PREMIÈRE IMPORTANCERÉDUCTION DES RISQUES DE BLESSURES :• Avant tout usage, s'assurer

Page 4 - DIRECTIVES DʼUTILISATION

AVERTISSEMENTS SUPPLÉMENTAIRES POUR MINITONDEUSES ÀFIL ROTATIF1. NE PAS immerger lʼoutil dans lʼeau ou lʼarroser au boyau. ÉVITER la pénétration de to

Page 5 - DE PODADORA/BORDEADORA

ADVERTENCIA: INSTRUCCIONES Y ADVERTENCIAS IMPORTANTES SOBRE SEGURIDAD:PARA REDUCIR EL RIESGO DE LESIONES:• Antes de utilizar la herramienta, asegúres

Page 6 - INSTRUCCIONES DE OPERACIÓN

• Retire el tornillo de la segunda sección del protector.• Inserte la lengüeta superior de la segunda sección del protector en la primera sección de

Page 7

· GARANTÍA BLACK & DECKER · BLACK & DECKER WARRANTY. SOLAMENTE PARA PROPOSITOS DE MEXICO Distributor Name · Sello firma del distribuidor Date

Comments to this Manuals

No comments

Black-decker GH750 User Manual

Browse online or download User Manual for Gardening equipment Black-decker GH750. Black & Decker GH750 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Gardening equipment Black-decker GH750