7
Warning! The hole in the inflator
adaptor acts as a relief valve to prevent
over-inflating. Do not permanently cover
the hole.
Resetting the motor thermal safeguard
The motor of the appliance is fitted with
a thermal safeguard. This device
automatically switches the appliance off
in case of overheating. If this occurs,
proceed as follows:
◆ Switch the appliance off and remove
the plug from the wall socket.
◆ Allow the unit to cool. When the unit
has cooled down, check and clean
the filters.
◆ Re-insert the plug in the wall socket
and switch the appliance on.
Emptying the container (fig. I & J)
When the container is full it should be
emptied. Always empty the container
into a waste bin outdoors.
◆ Slide the container release button (3)
towards the back of the appliance to
release the container door (2).
◆ Open the container door.
◆ Empty the container as necessary.
◆ Close the container door. Make sure
the container door clicks into place.
Cleaning, maintenance and
storage
Warning! Before cleaning and
maintenance, switch the appliance off
and unplug it.
◆ From time to time wipe the
appliance with a damp cloth. Do not
use any abrasive or solvent-based
cleaner. Do not immerse the
appliance in water.
Cleaning the motor filter (fig. K & L)
The filter is re-usable and should be
cleaned regularly.
◆ Remove the lid (22).
◆ Take the filter (23) out of the
appliance.
◆ Shake off excess dust by tapping the
filter into a dustbin.
◆ Refit the filter (23) into the appliance.
◆ Refit the lid (22). Make sure the lid
(22) clicks into place.
Cleaning the exhaust filter (fig. M)
The filter is re-usable and should be
cleaned regularly.
◆ Open the cover (17).
◆ Pull the filter (24) from the retaining
pin.
◆ Wash the filter in warm, soapy water.
◆ Make sure the filter is completely dry.
◆ Refit the filter (24).
◆ Close the cover.
Replacing the filters
The filters must be replaced when
showing signs of wear or damage.
Replacement filters are available from
your Black & Decker dealer.
◆ Remove the old filters as described
above.
◆ Fit the new filters as described
above.
Storing the appliance (fig. N)
◆ Flip up the power cord retainer (4).
◆ Wind the cord around the container
and the retainer as shown.
Mains plug replacement
(U.K. & Ireland only)
If a new mains plug needs to be fitted:
◆ Safely dispose of the old plug.
◆ Connect the brown lead to the live
terminal in the new plug.
◆ Connect the blue lead to the neutral
terminal.
Warning! No connection is to be made
to the earth terminal. Follow the fitting
instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Separate collection.
This product must not be
disposed of with normal
household waste.
Comments to this Manuals