USING THE CLAW (FIGURE F)
To release claw (7):
released you can let go of button.
forward until it comes in contact with the
workpiece.
rotate fully back to the stop position.
BLADE INSTALLATION AND REMOVAL (FIGURE G)
CAUTION:
before making any adjustments or removing or installing attachments or accessories.
The blade should extend past the shoe
and the thickness of the workpiece during
the cut. Select the blade best suitable for
the material to be cut and use the shortest
blade suitable for the thickness of the
material.
WARNING: Cut hazard
breakage may occur if the blade does not
extend past the shoe and the workpiece
during the cut. Increased risk of personal
injury, as well as damage to the shoe and
workpiece may result.
TO INSTALL BLADE INTO SAW
release lever
the direction shown in figure G.
release lever
lock blade into position.
TO REMOVE BLADE FROM SAW
WARNING: Burn hazard. Do not touch the blade immediately after use. Contact
with the blade may result in personal injury.
release leverfigure G.
TRIMMING BRANCHES
the tool.
10
G
8
F
3
7
5
4
Comments to this Manuals