Black & Decker TO3290XSD Use and Care Manual download pdf (Page 9)

Bagel Function |

No preheat needed for this function.

1. Press the Bagel function button ( ). The blue light will illuminate.

2. The oven will either default to factory function settings or to the last setting

used. (see Function Chart on page 11)

3. If needed, press the time/toast shade button (

) to select the desired

shade. Up arrow for a darker shade, and Down for a lighter shade.

Note: Shades 1-7 are available, 1 being the lightest and 7 being the darkest.

4. Place food directly on rack in the middle rack position and press the Start/Stop

button (I/0) to begin toasting.

5. There will be an audible beep once the toasting cycle is complete and the oven

will stop heating.

6. Unplug the appliance when not in use.

Reheat Function |

No preheat needed for this function.

1. Press the Reheat function button ( ). The blue light will illuminate.

2. The oven will either default to factory function settings or to the last setting

used. (see Function Chart on page 11)

3. If needed, press the temperature button (

) to select the desired

temperature. Up arrow for a higher temperature, and Down for a lower

temperature.

4. If needed, press the time buttons (

) to select the desired time. Up arrow

for a longer time period, and Down for a shorter time period. Select Stay On

by pressing the Down arrow past Zero. The Stay On icon ( ) will show in

the display panel.

5. Place food on middle or low rack and press the Start/Stop button (I/0) to

begin reheating the food.

Note: Use a metal, oven-tempered glass, or ceramic baking dish.

6. If using the oven timer, there will be an audible beep once the cycle is complete

and the oven will stop heating. If not using the timer, press the Start/Stop

Button (I/0) once cycle is complete.

7. Unplug the appliance when not in use.

OPERATING YOUR OVEN

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 45 46

No comments

Black & Decker TO3290XSD Use and Care Manual Page 9