Black & Decker FIRESTORM FS210LS Instruction Manual download pdf (Page 18)

1818

STARTING AND STOPPING SAW

The on/off switch (A) Fig. 34 is located on the front of the

saw cabinet. To turn the saw “ON”, move the switch (A)

up to the “ON” position. To turn the saw “OFF”, move the

switch (A) down to the “OFF” position.

MAKE SURE THAT THE SWITCH IS IN

THE “OFF” POSITION BEFORE PLUGGING IN THE

POWER CORD. IN THE EVENT OF A POWER FAILURE,

MOVE THE SWITCH TO THE “OFF” POSITION. AN

ACCIDENTAL START-UP CAN CAUSE INJURY.

LOCKING SWITCH IN THE “OFF”

POSITION

IMPORTANT: When the tool is not in use, the switch

should be locked in the “OFF” position to prevent

unauthorized use. To lock the tool, grasp the switch

toggle (B) and pull it out of the switch (Fig. 35). With the

switch toggle (B) removed, the switch will not operate.

However, should the switch toggle be removed while the

saw is running, the machine can be turned “OFF,” but

cannot be restarted without re-inserting the switch toggle

(B).

BLADE RAISING AND

LOWERING CONTROL

To raise or lower the saw blade, turn handwheel (A) Fig.

36. Turning the handwheel clockwise lowers the blade

and turning the handwheel counterclockwise raises the

blade.

THE BLADE TILTING LOCK HANDLE

(B) FIG. 36, MUST BE LOCKED DURING ALL

CUTTING OPERATIONS.

Fig. 34

Fig. 35

Fig. 36

OPERATING CONTROLS AND ADJUSTMENTS

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 67 68

No comments

Black & Decker FIRESTORM FS210LS Instruction Manual Page 18