Black & Decker FSMH1621 Service Manual download pdf (Page 10)

ENGLISH

(Original instructions)

Carpet refreshing

u Place a cleaning pad (12) on the oor with the ‘hook &

loop’ side facing up.

u Raise the steam mop off the resting mat (13) and lightly

press it down onto the cleaning pad (12).

u Place the carpet glider (14) on the oor.

u Lightly press the steam mop down onto the carpet glider

(14) until it clicks into place.

u Place the steam mop on the resting mat. (13)

u Connect the steam mop to the mains.

u Press the ON/OFF button (1). It takes approximately 15

seconds for the steam mop to heat up.

u Press the Autoselect

button (6) to the Wood/Laminate

setting.

u Pulling the handle (10) back will activate the steam pump.

After a few seconds steam will start to come out of the

steam head.

u Push and pull the steam mop slowly across the carpet to

thoroughly refresh each section.

Note: During use you may turn off the steam pump by return-

ing the handle (10) to the upright position, this convenient

feature will allow you to place the steam mop on the resting

mat (13) so that you may move items of furniture with out the

need to switch the appliance off.

u When you have nished using the steam mop, return the

handle (10) to the upright position and turn it ‘OFF’, place

it on the resting mat (13) and wait until the steam mop

cools down. (approximately ve minutes)

Caution! If steam is observed escaping from the join between

the hand held steam cleaner and the steam mop body, switch

off and disconnect the unit from the mains supply. Allow to

cool. Remove the hand held steam cleaner from the steam

mop body. Inspect the seal (22) on the steam nozzle (4) and

hose (23) (g. G). If the seal is missing or damaged then

please contact your nearest authorised repair agent. Do not

use the appliance. If the seal is in good condition re-t the

hand held steam cleaner to the steam mop body ensuring that

it is seated rmly in place.

Caution! It is important to monitor the water level in the water

tank. To rell the water tank and continue to sanitise/clean, re-

turn the handle (10) to the upright position and turn the steam

mop ‘OFF’. Unplug the unit from the electrical wall outlet, rell

the water tank (8).

Caution! Never leave the steam mop in one spot on any

surface for any period of time. Always place the steam mop on

the resting mat (13) with the handle (10) in the upright position

when stationary and make sure the steam mop is turned off

when not in use.

After use (Fig. L & M)

u Return the handle (10) to the upright position and turn the

steam mop ‘OFF’,

u Place the steam mop on the resting mat (13) and wait until

the steam mop cools down. (approximately ve minutes)

u Unplug the steam mop from the electrical wall outlet.

u Empty the water tank (8).

u Remove the cleaning pad (12) and wash it ready for

next use. (Take care to follow the wash care instructions

printed on the cleaning pad).

u Wrap the supply cable around the cable tidy hooks (15 &

16).

Note: The top cable tidy hook (16) rotates to easily release

the cable ready for next use.

u Clip the supply cable onto itself using the cable tidy clip

(29) close to the plug.

u Place steam mop on the resting mat (13) for storage.

Note: With the handle (10) in the upright position, the cable

neatly wrapped around the cable tidy hooks (15 & 16) and

secured with the cable tidy clip (29) your steam mop will stand

on its own for storage. Alternatively there is a hanging bracket

(30) built into the hand grip (31) which will allow your steam

mop to be hung from a suitable hook on the wall. Always

ensure that your wall hook is capable of supporting the weight

of the steam mop safely.

Hand held steam cleaning

u Attach the required accessory.

u Connect thehand held steam cleaner to the mains.

u Press the ON/OFF button (1). It takes approximately 15

seconds for the hand held steam cleaner to heat up.

u Lift the lock off (2) and pull the trigger switch (3) to activate

the steam pump. After a few seconds steam will start to

come out of the accessory.

Note: During use you may turn off the steam pump by releas-

ing the trigger switch, this convenient feature will allow you to

place the hand held steam cleaner down for a short time so

that you may move items of furniture, then continue cleaning

without the need to switch the appliance off.

u When you have nished using the hand held steam

cleaner, release the trigger switch (3), turn it ‘OFF’and dis-

connect from the mains supply. Wait until the steam mop

cools down before storing. (approximately ve minutes)

Caution! It is important to monitor the water level in the water

tank. To rell the water tank and continue to sanitise/clean,

turn the hand held steam cleaner ‘OFF’. Unplug the unit from

the electrical wall outlet, rell the water tank (8).

Maintenance and cleaning

Your Black & Decker corded appliance has been designed to

operate over a long period of time with a minimum of main-

tenance. Continuous satisfactory operation depends upon

proper appliance care and regular cleaning.

Warning! Before performing any maintenance or cleaning on

corded appliances switch off and unplug the appliance.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Black & Decker FSMH1621 Service Manual Page 10

Comments to this Manuals

Related products and manuals for Steam cleaners Black & Decker FSMH1621