GasAlertMax
User Manual
Self-Test Pass
If the detector passes the self-test, the detector begins
normal operation. The LCD displays the ambient gas
readings.
The detector starts recording the maximum gas exposure
(MAX) and calculating the short-term exposure level (STEL)
and time-weighted average (TWA) exposures.
Self-Test Fail
If the detector fails the self-test, refer to the
Troubleshooting section.
Deactivating the Detector
To deactivate the detector, press F and hold for 5
seconds.
The audible alarm beeps four times, the visual alarm flashes
four times, and then the LCD displays the following:
The LCD deactivates and the detector stops normal
operation.
Note
If F
is held down for less than 5 seconds, the
detector will not shutdown.
14
Comments to this Manuals