Black & Decker MULTI-GAS DETECTORS User Manual download pdf (Page 27)

GasAlertMax

User Options Menu

The date and time displays in the

following order:

Day of the week (Monday = 1),

Hours (h),

Minutes,

Date

(D)

Month

(M)

Year

(Y)

Use H and G to adjust the time and

date to your local setting. Press C to

confirm each setting.

Sensor Enable/Disable Option

a Warning

Disabling an installed sensor configures the

detector to a one, two, or three-gas unit. No

protection is now provided for the gas targeted

by that sensor(s). Disabling a sensor should be

performed with extreme caution.

In the event a sensor fails, sensor disable can be used to

deactivate the sensor fail alarm. The sensor should be

replaced and enabled as soon as possible.

If a sensor is disabled, the detector still functions normally

with the remaining enabled sensors. The sensor can be

enabled again at any time.

To enable or disable a sensor,

press C when the LCD displays

toggLE H2S (CO, LEL, or O2)

SEn. For this example the H

sensor is toggled.

Note

Whenever you enter the sensor enable/disable

option, it toggles the option on or off (depending on

its current status).

The LCD displays whether the sensor is now on or off.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

No comments

Black & Decker MULTI-GAS DETECTORS User Manual Page 27