Black & Decker GH710 Instruction Manual download pdf (Page 7)

SWITCHING ON AND OFF

• To switch the tool on, squeeze the trigger

lever.

• To switch the tool off, release the trigger

lever.

• With the unit on, angle unit and slowly

swing the trimmer side to side as shown in

figure I.

OPERATING THE TRIMMER

• Maintain a cutting angle of 5° to 10° as shown in figure J. Do

not exceed 10°(figure J1). Cut with the tip of the line. To keep

distance from hard surfaces use edge guide (7). Pull the guide out

until it snaps securely into place.

ATTACHING EXTENSION CORD

• An extension cord retainer

(figure H) is built into the switch

handle that prevents the cord

from coming unplugged. To use

this feature, simply double the

extension cord about 8 inches

(203mm) from the end, and

insert it into the slot (10) in the

end of the handle area. Hook

the loop formed by doubling the

cord over the tab (11). Gently

tug on the cord to insure that it is

firmly retained in the trimmerʼs

handle. Plug the receptacle end of the extension cord into the

plug blades (12) in the trimmer.

WARNING: Always use proper eye protection that conforms

to ANSI Z87.1 (CAN/CSA Z94.3) while operating this power tool.

CAUTION: Inspect area to be trimmed and remove any wire,

cord, or string-like objects which could become entangled in the

rotating line or spool. Be particularly careful to avoid any wire which

might be bent outwardly into the path of the tool, such as barbs at the

base of a chain link fence.

OPERATING INSTRUCTIONS

-10

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

No comments

Black & Decker GH710 Instruction Manual Page 7